Back to Diagnostic Tools

Launch X431 CR3001 OBD2 OBDII Auto Code Reader Scanner Creader 3001 Car Diagnostic Tool Same as Al419 PK ELM327 AD310 Scan tool

162 orders


ChinaRussian Federation
Buyer protection
Safe shopping
Easy returns and refunds
Free shipping worldwide

Launch Creader 3001 OBDII / EOBD Code Reader Scanner Support Multilanguages

As everybody who has cars knows, people always spend hundreds of even thousands of dollars on their vehicles just because the engine light was on. The easiest way to reset the check engine light and clear any codes is to use a scan tool, which plugs into the OBD2 DLC port, usually somewhere on the driver’s side. Check your owner’s manual for the location. For DIYers, you don’t need to invest in a top-of-the-line scan tool for basic diagnostic functions, our Launch Creader 3001 make DIYer and car enthusiatist repair their vehicle’s problem by themselves.

Top 5 Reasons to Get Launch Creader 3001:

1.Accureate Quick Diagnosis Tool
2.Full Funciton OBD Scanner
3.Wide Compatibility
4.Powerful Scan Tool
5.100% Risk Free Purche

Launch Creader 3001 Functions List:

I/M Readiness status test
View freeze frame date
View data stream
O2 Sensor
Evap system test
On-Board monitor test
Read & Clear DTCs
Identify VIN information
DTC code look up
Turn off MIL(Malfunction Indicator Lights)

Creader 3001 supports 10 modes of OBDII diagnostic :

Mode $01 Request current powertrain diagnostic data.
Mode $02—Request freeze frame information.
Mode $03—Request emissions-related diagnostic troublecodes.
Mode $04—Clear/reset emissions-related diagnosticinformation.
Mode $05—Request oxygen sensor monitoring test results.
Mode $06—Request on-board monitoring test results for specific monitored systems.
Mode $07 — Request emission-related diagnostic troublecodes detected during current or last completed drivingcycle
Mode $08—Request control of on-board system, test orcomponent.
Mode $09—Request vehicle information.
Mode $0A—Request emissions-related diagnostic troublecodes with permanent status after a clear/reset emission-related diagnostic information service.

Launch Creader 3001 Support Languages:

Multi-Language: English , French , Russian , Spanish ,German, Italian ,Portuguese

How to change Languages?

Launch Creader 3001 Support Vehicle Models:

Support Car Models for OBDII diagnostic function:
(Note: CR3001 only Support 12V Gasoline& Diesel, Does not support 24V Truck )
American Car :
Need Standard OBD2 Protocols from 2000 to now
for Chrysler , for Ford, for GM, For Jeep …
European Car :
Need Standard OBD2 Protocols from 2003 to now
For Alfa romeo , for SAAB ,for Acura , for Opel , for Audi for Seat , for Peugeot , for Re-nault
For Bentley , for Skoda , for Daewoo , for Benz , for Daihatsu , for Land Rover , for BMW , for Vauxhall , for Citroen , for Volvo , for Fiat , for VW , for Ford , for Jaguar…
Japanese/Korean Car:
Need Standard OBD2 Protocols from 2006 to now
for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai , for Dacia , for Lexus , for Mazda, for Nissan, for Subaru , for Suzuki, for Toyota…
Chinese Car:
Need Standard OBD2 Protocols from 2009 to now
NOTE: if you are not sure whether it support your car , pls contact seller and send your car brand , model and release year , seller will check it for you

Launch Creader 3001 Support Protocols:

Support OBD 2 protocols car :

1.SAE J1850 PWM(41.6Kbaud)
2.SAE J1850 VPW(10.4Kbaud)
3.ISO9141-2(5 baud init,10.4Kbaud)
4.ISO14230-4 KWP(5 baud init,10.4 Kbaud)
5.ISO14230-4 KWP(fast init,10.4 Kbaud)
6.ISO15765-4 CAN(11bit ID,500 Kbaud)
7.ISO15765-4 CAN(29bit ID,500 Kbaud)
8.ISO15765-4 CAN(11bit ID,250 Kbaud)
9.ISO15765-4 CAN(29bit ID,250 Kbaud)

They are all obd2 scanner,check engine light, read and clear codes, view freeze frame data, I/M readiness status test, reads live datastream, read vehicle information, misfire test. BUT Compare with al319, launch 3001 can do O2 Sensor test , Evap system test, On-Board monitor test.

How to Verify Whether the Vehicle Will Pass the Emission Test With 3001 Creader?

After entering the I/M Readiness,there will be 10 results on the list. Misfire monitor,fuel system,component monitor,catalyst monitor,heated catalyst,EVAP system,secondary aire sys,O2 sensor,O2 sensor heater EGR and/or WT.There will be an OK if each of them works fine.(Not all vehicles have these 10 parts)

Launch Creader 3001 Detect EVAP System:

The evaporative mission control (EVAP) system captures gasoline fumes and other emisions produced when fuel evaporates within the gas tank or fuel system.The EVAP system then returns there vapors to the combustion process to keep harmful chemicals from reaching the air when the vehicle is not running.

Different Between Launch 3001 scanner and Autel AL319?

They are all obd2 scanner,check engine light, read and clear codes, view freeze frame data, I/M readiness status test, reads live datastream, read vehicle information, misfire test. BUT Compare with al319, launch 3001 can do O2 Sensor test , Evap system test, On-Board monitor test.

Launch Creader 3001 Scanner FAQs:

Question 1:Does it tell you more than just the code ? Also does it work on 90's cars ?
Answer 1:96 and up vehicles have obd2 so if you vehicle is 96 or up yes if it's a 95 down to 80 something it's obd1 which this tool can read it just doesn't come with the cable to read obd1 so you'll have to order it separately

Question 2:Can Launch Creader 3001 software update?
Answer 2:Hello, this scanner do not need to upgradeable.

Question 3:Can Launch Creader support for Benz C230K 2005?
Answer 3:It can not work for 2005 c230K, but launch creader 3001 can work for 2006-2016 for benz cars.

Question 4:Will it work for honda accord 2009 lxp
Answer 4:Hello, yes ,it can work for honda accord 2009.

Question 5:Is this compatible with my 2007 for toyota avanza in the philippines?
Answer 5:Hello, I am sorry, I can not sure, I do not know if your car is JOBD car or OBD2 car, 3001 can not support jobd car, it support obd2 protocol car..

Launch Creader 3001 Customers Reviews:
Review 1:This Scan Tool is a good one, You can read and erase codes easily. I just used on a 2008 Civic and I was able to read code that in this case was a faulty oxygen sensor and after repair I was able to erase code. All
I like Launch Tools.

Review 2:Simple, cheap, and it works! Gave great live streaming info. Too bad I don't know much of the data or have use for it at this time. But this would be really useful in the future. I mainly bought this to remove an code error. Although keep in mind, it you do not replace/repair the fault itself, the error will come back.

Review 3:I used this to check the A/F and O2 sensors on my truck to determine if the sensors were bad or if I really needed to replace my catalytic converter. The I/M readiness information is useful when you are preparing for a smog inspection.

Review 4:I used it on 2006 for BMW 325i and 98 for Toyota Sienna. work great on both cars. Reading code is a lot faster than my 5 years old OBD scanner. The display is a little small and a bit hard to read the text, otherwise, it is a good scanner. The oxygen sensor test looks cool but I haven't gotten a chance to try it yet.

Review 5:I was using an OBD2 scanner that linked to my smartphone but unless I wanted to pay much money for an app that gave me more than the elementary functions it did not do enough. This Creader has many features and easy to use. No need for batteries as it runs off your car's voltage. The screen is bright and very easy to read plus it has lots of features that my old one did not have unless you paid for a better app.

Launch Creader 3001 Specifications:
Screen: 1.77 ” TFT, 160*128dpi
Voltage Range: 9-18V
Operating Temperature : 0ºC -50 ºC (32 ºF -122 ºF )
Environment Temperature: -20 ºC -70 ºC (-4 ºF -158 ºF )
Dimension : 118mm*68mm*22.3mm(4.65″ *2.68 ” *0.88 ” )
Weight: <200g

Launch Creader 3001 Package includes:

1pc x Launch Full Obdii/Eobd Code Reader Scanner Creader 3001 Diagnostic Tool

Brand Name


Item Length




Model Name


External Testing Certification


Material Type




Item Type

Car Diagnostic Cables and Connectors

Special Features


Item Weight


Software Version




Hardware Version

LAUNCH Creader 3001

Item Height


Item Width





1 year


Fast and safe

After sale service

do all we can


the newest




stable and strong

Place of Origin

Guangdong, China (Mainland)

Car Maker

Launch Creader 3001


OBDII Auto Scanner

Shipping and delivery

We are proud to offer international shipping services that currently operate in over 200 countries and islands worldwide. Nothing means more to us than bringing our customers great value and service. We will continue to grow to meet the needs of all our customers, delivering a service beyond all expectation anywhere in the world.

How do you ship packages?

Packages from our warehouse in China will be shipped by ePacket or EMS depending on the weight and size of the product. Packages shipped from our US warehouse are shipped through USPS.

Do you ship worldwide?

Yes. We provide free shipping to over 200 countries around the world. However, there are some locations we are unable to ship to. If you happen to be located in one of those countries we will contact you.

What about customs?

We are not responsible for any custom fees once the items have shipped. By purchasing our products, you consent that one or more packages may be shipped to you and may get custom fees when they arrive to your country.

How long does shipping take?

Shipping time varies by location. These are our estimates:

Location *Estimated Shipping Time
United States 10-65 Business days
Canada, Europe 10-65 Business days
Australia, New Zealand 10-30 Business days
Central & South America 15-65 Business days
Asia 10-65 Business days
Africa 15-65 Business days
*This doesn’t include our 2-7 Business day processing time.

Do you provide tracking information?

Yes, you will receive an email once your order ships that contains your tracking information. If you haven’t received tracking info within 5 days, please contact us.

My tracking says "no information available at the moment".

For some shipping companies, it takes 2-15 business days for the tracking information to update on the system. If your order was placed more than 15 business days ago and there is still no information on your tracking number, please contact us.

Will my items be sent in one package?

For logistical reasons, items in the same purchase will sometimes be sent in separate packages, even if you have specified combined shipping.

If you have any other questions, please contact us and we will do our best to help you out.

Refunds & returns policy

Order cancellation

All orders can be cancelled until they are shipped. If your order has been paid and you need to make a change or cancel an order, you must contact us within 12 hours. Once the packaging and shipping process has started, it can no longer be cancelled.


Your satisfaction is our #1 priority. Therefore, you can request a refund or reshipment for ordered products if:

  • You do not receive them within the guaranteed time (90 calendar days not including 2-7 calendar day processing)
  • You receive the wrong item
  • You do not want the product you have received (but you must return the item at your expense and the item must be unused)

We do not issue the refund if:

  • Your order does not arrive due to factors within your control (e.g. providing the wrong shipping address)
  • Your order does not arrive due to exceptional circumstances outside our control (e.g. not cleared by customs, delayed by a natural disaster)
  • Other exceptional circumstances outside the control of

*You can submit refund requests within 15 days after the guaranteed period for delivery (90 calendar days) has expired. You can do it by sending a message on page.

If you are approved for a refund, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, according Pay Pal rules (up to 30 days).


If for any reason you would like to exchange your product, perhaps for a different size in clothing. You must contact us first and we will guide you through the steps.

Please do not send your purchase back to us unless we authorize you to do so.

Real customer reviews

There are no reviews yet.
Write a review

By using this website you agree to accept our Privacy Policy and Terms & Conditions